Home ProductsToys Testing Equipment

ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester

ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester

    • ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester
    • ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester
    • ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester
    • ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester
    • ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester
    • ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester
    • ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester
  • ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester

    Product Details:

    Place of Origin: China
    Brand Name: SKYLINE
    Certification: EN71 Sharp Edge Tester
    Model Number: SL-S12

    Payment & Shipping Terms:

    Minimum Order Quantity: 1
    Price: Sharp Edge Tester
    Packaging Details: Standard export package
    Delivery Time: 10 days
    Payment Terms: TT,paypal,
    Supply Ability: 10 pcs/week
    Contact Now
    Detailed Product Description
    SKYLINE: Sharp Edge Tester Standards: ISO 8124-1 EN-71,ASTM F963
    Weight: 3.5 Kg Dimensions: 290x180x115 Mm
    Accessories: Charging Unit, Foot Switch, One Roll Of PTFE Tape, Base Plate Warranty: 18 Months

    1.35LB Fixed Force Sharp Edge Tester ISO 8124-1 , Children Products / Toys Safety Test Equipment

     

    Application

    Used to determine whether the edge of a toy or item is a sharp edge with an unreasonable risk of injury.


    Product information
    To determine whether accessible edges on toys are likely to cause injury. A self-adhesive PTFE tape is attached to a mandrel, which is then rotated for a single 360-degree revolution along the accessible edge being tested. If the tape is cut in half or longer in length (approx. 13 mm), the edge is identified as a hazardous sharp edge. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing.

     

    Test principle

    The steel shaft used to simulate children's fingers needs to be hardened. The surface Rockwell hardness should be no less than 40, the surface roughness should not be greater than 0.40 microns, and the diameter should be 9.35 mm ± 0.12 mm. A layer of simulated artificial skin tape was applied perpendicularly to a steel shaft wrapped with simulated artificial skin glue with a force of 6 N (1.35 lb). The steel shaft was constant tangent at 23 mm/sec ± 4 mm/sec. The speed is rotated for one week. Check the edge of the test to cut (cut) the simulated artificial skin adhesive paper. If cut (cut), the tested edge is defined as a potentially dangerous sharp edge.


    Sharp edge tester usage and judgment results
    1. Attach the PTFE adhesive tape to the mandrel as required, and then rotate the mandrel along the tested accessible edge by 360°. Check that the test adhesive tape is gravity-corrected.
    Whether the ball can pass the test template completely. The length of the cut. Calculate the percentage of the length of the cut tape. Judgment: If the adhesive tape is cut by 50%
    Split, the edge is considered to be a sharp edge.
    2. The edge to be tested shall be the accessible edge determined after the accessibility test of the toy part or component.
    3. If the touchable edge of the toy as a whole cannot be tested, in the case of simulating the toy as a whole, the accessible edge can be removed and tested separately.
    4. The key to the sharp edge test is how to fix the detected edge and ensure that the mandrel is at right angles to the edge, and there is no phase between the mandrel and the edge during the test.
    For sports.
    5. During the rotation of the mandrel, it should be ensured that the pressure applied to the mandrel is continuously stable.

     

    Specification

     Size
     (L*W*H)29*19*10cm
     Weight
     3.5Kg
     Speed
     1.00±0.08 In/s
     Fixed force
     1.35LB
     Material
     stainless steel

     Accessories

     Tiefo Long Tape PTFE Tape  A set of foot switches, a power charger, an operating manual
     Standard
     ASTM F963 4.7, EN 71-1 8.11, 16 CFR 1500.49, ISO 8124-1 5.8

     

    Technical Parameters
    1.Diameter of rotary mandrel shown in table 1:

    Standard EN71-1 ASTM F 963/16CFR1500.49
    Nominal value φ(9.53±0.12)mm φ(0.375±0.005)inch
    Measured value φ9.450mm φ0.3720 inch


    2.Measured value of force shown in table 2:

    Standard EN71-1 ASTM F 963/16CFR1500.49
    Nominal value (6±0.5)N 1.35 lbf
    Measured value 6.00N 1.35 lbf


    3.Rotate speed of rotary mandrel shown in table 3:

    Standard EN71-1 ASTM F 963/16CFR1500.49
    Nominal value (23±4)mm/s (1.00±0.08)inch/s
    Measured value 19.3mm/s 0.760inch/s


    4.Roughness of rotary mandrel shown in table 4:

    Standard EN71-1 ASTM F 963/CFR150.49
    Nominal value ≤0.4 μm ≤16 micro inch
    Measured value 0.15 μm 5.9 micro inch

     

    Please review video of the Sharp Edge Tester operation as below link:

    https://youtu.be/dQZQHH2peHM

     


    ISO 8124-1 Lab Testing Equipment  1.35LB Sharp Edge Tester,Children Products / Toys Safety Test Equipment

     

     

    ISO 8124-1 Lab Testing Equipment  1.35LB Sharp Edge Tester,Children Products / Toys Safety Test Equipment

     

     

    Accessories

    ISO 8124-1 Lab Testing Equipment  1.35LB Sharp Edge Tester,Children Products / Toys Safety Test Equipment

     

     

    Contact Details
    Skyline Instruments Co.,LTD

    Contact Person: Miss. Kasey

    Tel: 86-769-23830463

    Fax: 86-769-38818154

    Send your inquiry directly to us (0 / 3000)